About Us
Company Overview
Employees and Partners
Associations

Construction Systems
 Multi-Story Building System
 Conversions
 Post & Purlin Building System
 Beam & Purlin Building System
 Standing Seam Roof Panel
 Standard Trim Package
 Doors & Hallways
 Color Charts

Design & Engineering
 Design & Layout
 Engineering

Installation
 Erection Services
 Engineering

 Contact Us

Completed Projects
 Photos
 Awards
 Conversions

Locations
 Projects
 Manufacturing
 Sales Offices

 

 

Company information:

Diamondback Metal Systems
4667 S. Lakeshore Dr #2
Tempe, AZ 85282
(480) 237-7700 Phone
(480) 237-7707 Fax
www.diamondbackmetal.com

Standing Seam Roof
Continuous concealed fastener, roofing and siding system for commercial, industrial and residential applications.

Features

  • Features a positive internal lock clip combined with precise snap-locking action at laps.
  • Clips do not interrupt the locking of the lapping ribs, thus resisting wind uplift and weather penetration. Each panel locks tightly over preceding panel along full length of rib.
  • Patented 18 GA clip-interlock system secures panels with no exposed penetrations.*
  • Clips do not require lap sealant and allow for thermal expansion.
  • Recommended minimum pitch 1/4" in 12".
  • Panel lengths up to 50 feet are available at no extra shipping cost.
  • Tech manual is provided with standard flashing and details.
  • Roof panels available in a wide variety of pre-painted colors and finishes.
  • Matching Galvalume(r) pre-painted finishes for flashing and flat stock are available.
  • All galvalume(r) products acrry 20-year material warranties.

Testing and Certification

  • Wind uplift-UL 90 Classification #204
  • ICBO Evaluation Report #3866
  • Dade County, Florida, Notice of Acceptance Number 97-0924.02
  • Air Infiltration: panel to meet air infiltration standards as tested in accordance with ASTM E 283-86
  • Water Penetration: Panel to meet water penetration standards as tested in accordance with ASTM E 331-86.